Do the Math: Efficient choices add up to smart savings!

Add a Smart Defrost Kit™ (SDK) to your system to lower energy costs and boost your bottom line.

The Smart Defrost Kit:

• Continually learns your system, keeping energy costs down and box temperatures consistent while maintaining product integrity.
• Reduces environmental impact and saves you money on energy.
• Helps you realize savings in as little as six months—with an approximate average of two years.
• Eliminates unnecessary defrosting with “smart” technology.
• Reduces the number of defrost cycles in commercial, walk-in refrigeration systems by 43.6 percent.*

Find out how much money and energy you could save by adding the Smart Defrost Kit to your system with our Energy Savings Calculator:

National chains have already started to see $200 to $600 in estimated savings a year, with power savings up to 9,500kWh a year by adding a Smart Defrost Kit to their commercial refrigeration system.

Instructions:

• Add heater watts [found on the nameplate of your evaporators] for all evaporators feeding into a single condensing unit and place into the Heater Watts field. Note: only one SDK can be used per condensing unit. The SDK cannot be used on rack systems.
• Select your state from the drop-down menu to determine your energy cost per kilowatt hour.

*Confirmed by ETL-verified testing.

Defrost skip rate based on third-party test results. Estimate only. Results may vary from application to application.

¹ U.S. rates from commercial electricity prices from the total electric industry, 2005, U.S. Department of Energy. Canadian rates from “Comparison of Electricity Prices in Major North American Cities,” 2005, HydroQuebec. Canadian rates are shown in Canadian dollars. Based on 1000kW with a consumption of 2,000,000kWh and a load factor of 28%. Rates in Ontario are taken from an average of rates in Toronto and Ottawa.
² Environmental impact statistics are calculated from formulas and data provided by the U.S. Climate Technology Cooperation and ENERGY STAR.